Effect of impregnation on the mechanical properties of jute yarns

Effect of impregnation on the mechanical

Authors

  • Al-Karaishi Mohammed Mechanical Engineering Department, Faculty of Engineering, University of Kufa, Najaf, Iraq

Abstract

 In this paper, characterizing of tensile behavior of dry jute yarn and impregnated jute yarn is proposed.  The results from dry yarn tensile tests showed the presence of 4 zones on the load-displacement curve and those of impregnated yarn tensile tests showed the presence of only one linear zone. Average Young’s modulus, average tenacity and average breaking stress of impregnated yarn are superior to those of dry yarn while average breaking strain of impregnated yarn is lower than that of dry yarn. Morphologies of tested yarns where discussed to elucidate damage mechanisms.

 

References

 

1. Nascimento, D. C. O., Lopes, F. P. D., and Monteiro S. N. (2010). Tensile behavior of lignocellulosic fiber reinforced polymer composites Part I piassava/epoxy .Revist Matéria, 15: 199-205.
2. Al-Kaabi, K., Al-Khanbashi, A., and Hammami, A. (2005). Date Palm Fibers as Polymeric Matrix Rein forcement, Polymer composites, 26: 486–497
3. Harritte, L. B., J., M., and Martien J. A. V. D. O. (2006). Mechanical properties of short-flax-fibre reinforced compounds., Composites, Vol. 37: 1591– 1604.
4. Beg, M. D. H., and Pickering, K. L. (2008). Reprocessing of wood fibre reinforced polypropylene composites. Part II: Hygrothermal ageing and its effects. Composites: Part A, 39(9): 1565–1571.
5. Priyadarshi Tapas Ranjan SwainȦ* and Sandhyarani BiswasȦ. (2014). Physical and Mechanical Behavior of Al2O3 Filled Jute Fiber Reinforced Epoxy Composites. International Journal of Current Engineering and Technology, Special Issue-2.
6. AMM Sharif Ullah, Sweety Shahinur and Hiroyuki Haniu. (2017). On the Mechanical Properties and Uncertainties of Jute Yarns. Materials , 10, 450; doi:10.3390/ma10050450.
7. Ajith Gopinath, Senthil Kumar.M and Elayaperumal A. (2014). Experimental Investigations on Mechanical Properties Of Jute Fiber Reinforced Composites with Polyester and Epoxy Resin Matrices. - Procedia Engineering 97: 2052 – 2063; doi: 10.1016/j.proeng.2014.12.448.
8. Sanjay M. R. and Yogesha B.. (2016). Studies on Mechanical Properties of Jute/E-Glass Fiber Reinforced Epoxy Hybrid Composites. Journal of Minerals and Materials Characterization and Engineering, 4: 15-25.
9. Patrick Severson (2012). Analysis of Multi-Directional Recycled Jute Fiber Composite behavior using experimental, numerical, and analytical methods; PHD thesis, Wisconsin Milwaukee Univ. Milwaukee, Wisconsin,USA.
10. Aziz Saaidia, abderrezak Bezazi, Ahmed Belbah, Salah Amroune and Fabrizio Scarpa. (2015). Evaluation of mechanical proprieties of jute yarns by two- and three-parameters weilbull method., Structural integrity and life 15(3): 157-162.
11. Almusawi A, Lachat R, Atcholi K.E, Traore B, Tie Bi S, Gomes S and Soulama S. (2016) Mis en oeuvre et caracterisation à base de fil de chanvre et de pate de polystyrene expanse recycle par l’Acetone. Journées d’Etudes Techniques – JET 2016.
12. Bo Madsen “Properties of Plant Fibre, (2004). Yarn Polymer Composites - An Experimental Study. TECHNICAL UNIVE RSITY OF DENMARK” Report BYG·DTU R-082 2004 ISSN 1601-2917 ISBN 87-7877-145-5.

Downloads

Published

2020-11-05

How to Cite

Mohammed, A.-K. (2020). Effect of impregnation on the mechanical properties of jute yarns: Effect of impregnation on the mechanical. International Journal Series in Engineering Science, 6(1), 19-30. Retrieved from http://ijseries.com/index.php/IJSES/article/view/20